Huawei inverter SUN2000-4KTL M1
The inverter Huawei incorporates software designed to achieve efficiency levels of up to 99.5% of solar panels,
the system optimizes the production of each solar panel of the solar installation.
Even with the monitoring system, control can be managed at the module level.
The Huawei SUN2000-4KTL M1 inverter has FusionHome-NetEco 10000s Management System
In addition to improving the operation of the solar installation Huawei inverters have an APP that allows real-time display of the parameters of the solar
installation, can optimize consumption and help improve the performance of the photovoltaic system.
The inverter can be combined with the Smart Home Hub.
The aim is to install a component with which the inverter manages to combine the production of photovoltaic energy
with the consumption of household appliances, thus optimizing the photovoltaic installation.
Monitoring SUN2000-4KTL M1 with APP.
Consult all the information about the energy production of the solar panels.
The consumption of connection to network, consumption graphs, consultation of historical,
configuration and optimization of the operation of the installation.
With the APP for Huawei Investers you can monitor your installation easily and easily.
Recommended maximum power of PV 1: 6,000 Wp
Maximum input voltage 2: 1,100 V
Operating voltage range 3: 140 V ~ 980 V
Starting voltage: 200 V
Rated input voltage: 600 V
Maximum input current per MPPT: 11 A
Maximum short circuit current: 15 A
Number of MPP trackers: 2
Maximum number of inputs per MPPT: 1
Input (DC battery):
Compatible battery: HUAWEI Smart String ESS 5kWh – 30kWh
Operating voltage range: 600 V ~ 980 V
Maximum operating current: 16 A.
Maximum charging power: 10,000 W.
Maximum discharge power: 4,400 W.
Network connection: three-phase
Rated power: 4,000 W.
Maximum apparent power: 4,400 VA
Rated output voltage: 220 Vac / 380 Vac, 230 Vac / 400 Vac, 3W / N + PE
AC mains frequency: 50 Hz / 60 Hz
Maximum output current: 6.8 A.
Total harmonic distortion (THD): ≤ 3%
Output (Backup power via Backup Box-B1)
Maximum apparent power: 3,300 VA
Rated output voltage: 220 V / 230 V
Maximum output current: 15 A.
Protection and operation:
DC switch disconnector: Yes
Islet grid detection: Yes
DC Reverse Polarity Protection: Yes
-Insulation monitoring: Yes
-D DC surge protection: Yes, compatible with TYPE II protection according to EN / IEC 61643-11
-ACV surge protection: Yes, compatible with TYPE II protection according to EN / IEC 61643-11
Residual current monitoring: Yes
-Ac surge protection: Yes
-Ac short circuit protection: Yes
Arc detection: yes
Ripple control receiver inputs: Yes
Built-in PID recovery: Yes
Ability to charge the battery from the network: Yes
Safety standards: EN / IEC 62109-1, EN / IEC 62109-2, IEC 62116
Network connection standards: G98, G99, EN 50438, CEI 0-21, VDE-AR-N-4105, AS 4777, C10 / 11, ABNT,
UTE C15-712, RD 1699, TOR D4, NRS 097-2-1, IEC61727, IEC62116, DEWA
Signal cable socket
Notes and explanations