Helioakmi Megasun 200E / 4.20m² Double Energy Selective Titanium Glass
Guaranteed durability by the sea
The outer lining of Heliosacmi (MEGASUN) is anodized aluminum, highly resistant to UV rays, wet climates and coastal areas. Its unique polygonal design offers double mechanical strength to the outer lining of the tank.
Megasun Sunscreen does not freeze
The innovative design of the closed-loop mantle provided by HELIOAKMI (MEGASUN) guarantees its stable operation even with freezing and at the same time ensures the collectors against the risk of clogging of salts.
Megasun Sunscreen Provides More Water for Winter
Powerful insulation of 50 mm thick polyurethane and high density 40 Kg / m3 provide the consumer with more hot water for use even if the outside temperature is 30 degrees C below zero.
The metal construction of the tank is 3 mm and is in accordance with DIN 4800-5. This means twice the capacity of the tank at high network pressures compared to most common solar water heaters.
Ensured rigidity of container in hard water
GLASS Solar Water Heaters – Internal protection of the container is achieved with DURO SMALT ELASTIC. This innovative method of protection is considered the most appropriate for its resistance to very hard water and its elastic properties allow it to follow the expansion-contraction of the tank thus avoiding the risk of cracks in most tanks with different enamel protection.
The Megasun Heliacum collector has three times the strength
Most solar panels, due to poor design, lack ventilation holes, resulting in winter (especially in humid climates) water vapor effects due to temperature difference, resulting in corrosion in the collector hood. The profile of HELIOAKMI (MEGASUN) has 4 ventilation holes which are completely sealed to prevent rainwater from entering.
Megasun Sunscreen works best
Because the MEGASUN absorber is made from a single sheet of titanium coating and copper tubes welded by the Ultrasonic method. This innovative welding method ensures total heat transfer and enables the solar collector to be as efficient as possible.
Megasun Solar Collector Utilizes Direct and Indirect Radiation
The titanium-coated single surface of the solar collector in combination with SOLAR TEMPERED GLASS and its special crystals minimize direct radiation reflections and make the solar collector HELIOAKMI (MEGASUN) the only high performance collector.
Loss-free stable performance
Double insulation of 40 mm stone wool and 20 mm side wool insulation ensure high performance and minimize losses of solar collector HELIOAKMI (MEGASUN).
Safety Reliability Prevention
In almost every country in the world, all solar panels have an unbreakable hail-resistant safety glass and for accident prevention purposes. Heliosacmi (MEGASUN) has a special TEMPERED GLASS 3.5 mm with strict international safety regulations.
Outstanding appearance – Easy to mount
The excellent exterior design of the appliance combined with the designed mounting bracket and the side hinges of the connecting tubes offer the possibility of easy installation, perfectly fitting with any building architecture.
Innovation in maintenance
The independent position of the magnesium rod allows it to be replaced quickly and easily.
Technical specifications of the boiler
Outer shell: Anodized aluminum
Tank insulation: 40 – 60 mm thick polyurethane
Cylinder Material: 2.5 mm Low carbon steel
Jacket material: Low carbon steel 1.5 mm
Internal tank protection: Enamel
Additional protection: Magnesium rod
Electrical resistance: Bronze
Thermostat: Four contacts bipolar
Resistance Power: Available from 0.8 KWw to 4 KW
Technical characteristics of the collector
Outer shell: Anodized aluminum profile
Collector Rear Back: 0.4 mm Galvanized Sheet
Back Insulation: 35mm Rockwool
Side insulation: 20 mm fiberglass
Absorber: Single sheet with selective titanium coating
Absorber Pipes: Copper pipes Φ 10 & Φ 22
Transparent Cover: Safety Glass (Solar Tempered Glass)
Waterproofing Material: EPDM Rubber, Transparent Silicone
Type MEGASUN 200E Glass Dual Energy Selective Titanium
Roof or Tiled Roof
Tank capacity (lt): 200
Dimensions (mm): 570 × 1320
Weight (kg): 65
Cylinder pressure test (bar): 10
Dimensions (mm): 2050x1010x90